The VOC Configuration
section of the Sensors page is
used to select a specific
Volatile Organic Compound
(VOC). This is done by
selecting an already pre-
defined VOC in the drop-down
list or by selecting Custom
and entering a Response
Factor and Molecular Weight.
• The Response Factor and
Molecular Weight are used
to calculate the actual
concentration of a
specific VOC.
The Network Settings page
is used to connect the
Q-Trak™ XP monitor to a
wireless network.
1. Select the Connect to
Network radio button.
2. Select a Wireless Network
down arrow to view the list of
available networks.
3. Select the desired network.
To Next Page
Loading...
