TSI Instruments Q-Trak XP - Appendix A Specifications

73
APPENDIX A
Specifications
Specifications are subject to change without notice.
The Q-Trak™ XP Indoor Air Quality Monitor Model 7585 arrives from
the factory with the following preset technical specifications.
Logging Capability .....................
73 million data points
Operating Temperature .............
40 to 105°F (5 to 40°C)
Storage Temperature ................
-4 to 60°F (-20 to 60°C)
Humidity ....................................
0 to 95% RH (non-condensing)
Altitude ......................................
Up to 4000 meters when using AC adapter
Meter Dimensions .....................
3.8 in. × 8.3 in. × 2.1 in.
(9.7 cm × 21.1 cm × 5.3 cm)
Weight with Batteries .................
1.2 lbs./0.55 kg
Power Requirements .................
Li-ion battery – 7.4V 3200mAh
AC Adapter – Input: 100-24 VAC, 50-60 Hz
Output: 12 VDC 3A
Battery Runtime .........................
8+ hours with 7585 base configuration
Languages Supported ...............
English, German, French, Traditional and
Simplified Chinese
Installed Sensors
Particulate Mass
Sensor Type ..............................
Optical Particle Counter (OPC)
Particulate Mass (PM) ...............
PM1.0, PM2.5, PM10
Range ........................................
0 to 500 µg/m
3
Accuracy ...................................
±10 μg/m³ (0 – 100 μg/m³),
±10% of reading 100 to 500 μg/m³
PM Resolution ...........................
1 µg/m
3
, 0.001 mg/m
3
PM Units ....................................
µg/m
3
, mg/m
3
Particle Counts (PC) ..................
PC0.3, PC0.5, PC1.0, PC2.5, PC5.0,
PC10.0
PC Resolution ...........................
0.01/cm
3
PC Units ....................................
#/cm
3
Response Time .........................
<10 seconds