The Display/Power
Management page is used to
configure the following functions
• Display Brightness adjusts
the brightness of the display.
• Display Sleep sets the time
when the instrument enters
into sleep mode. Sleep
mode is a power-saving
state that darkens the
display. To exit sleep mode
touch the display. The
selectable sleep time options
are 1, 5, and 15 minutes. By
default, Display Sleep is
1 minute.
• Enable Auto Sleep enables
and disables sleep mode.
• Require Passcode enables
and disables the passcode
protection feature. Once the
instrument enters sleep
mode a passcode is required
to regain access (passcode
is 7585).
To Next Page
Loading...
