Operation and Service Manual 51
Export Log Files
Logged data files can be exported to a USB flash drive or to a PC
via TrakPro™ Ultra Software.
Exporting to USB Drive
Attach a USB flash drive (thumb drive) to the Q-Trak™ monitor via
the USB port next to the power jack. Select a log file from the menu
and then select icon.
Alternatively, when viewing a logged data file, select the menu
and then select to export the file to the flash drive.
Files will be transferred to the USB drive in .CSV format for use with
spreadsheets on a computer.
Exporting Files to a PC
Connect the instrument to a computer via Wi-Fi
®
or the USB-C Cable
supplied with the instrument.
Open TrakPro™ Ultra Software on the PC (see TrakPro™ Ultra
Software user manual) and select a log file from the menu and then
select icon.
Alternatively, when viewing a logged data file, select the menu
and then select to export the file to the PC in a .db File format for
use with TrakPro™ Ultra Software. Files can then be exported as
.csv or other file formats for use with other software.
If exporting data to a USB flash drive, and there is not enough
space on the drive to house the file, or if some other error occurs
during the export, the following warning message will appear:
“Data Export Failed – Please Check USB Drive.” This warning
will persist unit it is dismissed.
To Next Page
Loading...
