TSI Instruments Q-Trak XP - Chapter 7 Logging Data

41
CHAPTER 7
Logging Data
From the Main Menu select
Dashboard then select
> Logging at the top of the
page. This leads to the
Dashboard page with the Start
button as shown below.
From this page either select
Start to begin logging data
based on the selected Logging
Profile or define a Logging
Profile by selecting .
NOTES
When selecting START
before creating a Logging
Profile the Q-Trak™ will log
data based on a default
Logging Profile and log a
single reading from all
available sensors using a
sample interval of 1 second.