TSI Instruments Q-Trak XP - Logging Data

42 Q-Trak™ XP IAQ Monitor Model 7585
Logging Data
To begin logging data,
select START.
When logging is initiated, the
Dashboard page displays
second by second measurement
readings next to the sensor icons
while the Avg value is the
average of all readings in the
log file.
NOTE
On-board memory is capable
of storing data from all
available sensors for 30 days
when sampling data once
a minute.
You can log data with Manual
Save, Continuous Save, or
Scheduled Save (see figure). To
stop logging at any time, select
STOP then select Yes.
NOTE
The Q-Trak™ always logs
data from all available
sensors.