TSI Instruments Q-Trak XP - Page 61

Operation and Service Manual 47
To create a new logging
schedule:
1. Select to create a
logging schedule.
2. Enter a schedule name.
3. If this is a recurring logging
profile, select Recurring and
select the days of the week
to log data.
4. Enter start times and end
times as desired.
5. If an additional time segment
is desired, select Add New
Segment and enter a start
time and end time.
6. Repeat step 5 to add more
time segments.
7. Add Notes to the schedule if desired.
8. Select DONE to finish editing and select SAVE to save changes.
NOTE
The list of time segments can exceed what is shown on the
display. To view additional time segments swipe up and down.
To edit an existing logging schedule:
1. Select and then select Edit.
2. Modify the schedule as desired.
3. Select DONE to finish editing and select SAVE to save changes.
To delete an existing logging schedule:
1. Select and select Delete.
2. Select Yes.