7. Select DISCARD to discard
all measurements or select
SAVE to save the %
Outdoor Air Calculation.
8. After saving the % Outdoor
Air Calculation you can
perform another % Outdoor
Air calculation or select the
icon to exit the %
Outside Air page.
Instead of making
measurements, you have the
option of entering values for
Outside Air, Supply Air, or
Return Air by selecting --- and
typing the appropriate value.
Select DONE when finished. The
calculation is then made using
entered value(s).
Lastly, if the % Outside Air
calculation cannot be made
using the measurements /
entered values, an error
message is shown along with a
DISCARD button.
Selecting DISCARD clears all
measurements/entered values
and you may start over.
Alternatively, you can select
Clear to clear a single
measurement/entered value
and repeat taking the
measurement/enter a new
value.entered value(s).
To Next Page
Loading...
