Revision C – January 2023
CDS2000 Page | 2
Proprietary Notice
The information contained in this publication is derived in part from proprietary data and trade secrets.
This information has been prepared for the expressed purpose of assisting operating and maintenance
personnel in the efficient use of the instrument described herein. Publication of this information does not
convey any rights to use or reproduce it or to use for any purpose other than in connection with the
installation, operation, and maintenance of the equipment described herein.
Copyright 2021. Printed in the USA. All Rights Reserved.
SAFETY INSTRUCTIONS
The following instructions must be observed:
Every effort has been made to design and manufacture this instrument to be safe for its intended
use. A hazardous situation may occur if this instrument is not used for its intended purpose or is
used incorrectly. Please Note: operating instructions are provided in this manual.
The instrument must be installed, operated, and maintained by personnel who have been
properly trained. Personnel must read and understand this manual prior to installation and/or
operation of the instrument.
The manufacturer assumes no liability for damage caused by incorrect use of the instrument or
for modifications or changes made to the instrument.
All protection features for external delivery components are intended to be used with the operator
present at delivery controls without exception.
Technical Improvements
Turbines Incorporated may modify the technical data herein without notice.
To Next Page
Loading...