8 OVEN C
ONTR
OLS AND C
OOKING
Step 3: Warming Up
D
uring this step
, the oven warms to the selected or pre-set
temperature.
S
t
ep 2: Select Cook Temperature
The o
v
en stores two different cook temperature settings (see
page 17 for mor
e information). Only items associated with
the selected temperatur
e setting can be cooked without
r
e-specifying the temperature setting.
T
o select a temperature, press the adjacent soft key.
NO
TE: I
f both temperature settings are the same, this screen will be bypassed and access to all food items will
be allo
w
ed.
Step 1: Turn the Oven On
When the oven is off (Figure 5), the oven temperature has
r
eceded below 150°F (66°C), but the display and keypad
r
emain on.
Press the On/Off key to turn the oven on.
TURBOCHEF NGO
OVEN OFF
REA DY T O C LE AN
F
igure 5: Oven Off
C
ook
ing
The oven is preprogrammed with recipe settings at the time of manufacture and is ready to operate out of the
box. If these settings are erased, new menu settings must be either loaded via Oven Connect (page 4), smart
car
d (page 16), or pr
ogrammed manually (pages 17-18).
The oven will not cook unless settings are present.
N
ote that the steps belo
w are not always sequential. Typically, multiple items are cooked before cooling the
oven (Step 10).
F
igure 6: Select Cook Temperature
F
igur
e 7: Warming Up
TEM P 2: 3 50F
TEM P 1: 5 00F
SEL EC T CO OK T EM PE RATUR E
WARMING UP
OVE N CC = 43 3F
OVE N SP = 50 0F
To Next Page
Loading...
