TurboChef NGO/SOTA - Changing Group;Item;Quantity Name; Changing Cook Settings

18 INFO
,
TEST
, AND EDIT MODE
E
diting R
ecipe Settings
Chang
ing Gr
oup/Item/Quantity Name
To change a food group, item, or quantity name:
1. Place the oven in Edit Mode (see page 17).
2.
P
ress the R2 soft key to edit temperature 1 groups
or the R4 soft key to edit temperature 2 groups
(F
igur
e 26, page 17).
3. Select the group that contains the item(s) you
want to edit.
4. Select a food item.
5.
S
elect a quantity (high-capacity menus only).
6.
From the “Recipe Edit” screen (Figure 27), edit
the
food gr
oup name:
-
Use the number keys to change a character.
-
Press the R1 soft key to advance to the next
character
.
-
Press the L1 soft key to return to the previous
character.
-
Press the R2 soft key to save changes.
7. Edit the recipe name:
- Press the Down key to move to the “Recipe
Name” field.
- Use the instructions provided in step 6 to
edit the r
ecipe name.
8. If applicable, edit the quantity name:
-
P
ress the Down key to move to the
“Q
uantity Name” field.
-
Use the instructions provided in step 6 to
edit the quantity name.
9.
Press the R2 soft key to save changes. For
additional editing options, see adjacent.
Chang
ing C
ook Settings
To change cook settings,
1. Follow the steps in Changing Group/Item/
Q
uantity N
ame
, adjacent.
2. Use the number keys to adjust event settings:
-
%
Time (0-100% in 1% increments). The
sum of the percentages across six events
must equal 100.
- % Top Blower (10-100% in 10% incr.)
-
% Bottom B
lower (10-100% in 10% incr.)
-
% Microwave (0-100% in 10% incr.)
3.
U
se the Down key to move the cursor to the
“
Warm Time” field.
NOTE: For ease of navigation, the R3 “Time” soft key
jumps the cursor to the warm time field.
4. Use the number keys to adjust the cook time.
5. Press the R2 soft key to save changes.
NO
TE: For the save to take effect, the cursor must be
adv
anced past the field that was last edited.
6.
If desired, press the R4 soft key to test-cook the
new settings. In doing so, the oven may require
additional warmup time.
7. When all editing is complete, return to the Set
O
ptions scr
een and turn off the Edit Mode (see
page 12).
This will allo
w access to the regular
cook mode.
F
igur
e 27: Recipe Edit Screen
EVENT %TIM
%TOP %BOT %WAV
1 050 070 060 050
2 050% 060 060 050
3 000 010 010 000
4 000 010 010 000
5 000
010 010 000
6 000 010 010 000
WARM TIME = 00:35
LUNCH A
% TOTAL = 100
SP = 500F CC = 455F
WARM
TIME
SAVE
QTY 1
R1
R2
R3
R4
L1
L2
L3
L4