INFO, TEST, AND EDIT MODE
11
O
v
erview of the Info Mode
To access the Info Mode, press the Info key when the
oven is either off or cooling down. To toggle between
scr
eens 1 and 2, pr
ess the Up or Down key.
The I
nfo M
ode serves four main purposes:
1.
T
o display o
ven information.
2.
T
o provide access to Test Mode and additional
diagnostic tools for service technicians.
3.
To turn oven options and features on/off.
4. To update oven settings.
From screen 1 of the Info Mode (Figure 12):
-
View the last temperature set point selected to
cook (helps in diagnosing potential issues)
-
View the oven serial number
-
View the menu part number and revision
-
View the software version
-
Scroll through counters (cook counter, total
cook time, magnetron time, and total oven on
time)
- View the operating voltage (North America
models only)
- Access the fault log
- Access service phone numbers
F
rom screen 2 of the Info Mode (Figure 13):
-
A
ccess Test Mode
- Access the Set Options screen (page 12)
- Set the language (not available on all models)
-
Set the date/time
-
Access the Load Menu screen
-
Increase/decrease the tone volume (sound)
V
iewing C
ook Counter/Time Logs
F
r
om Screen 1 of the Info Mode (Figure 12), press
the R1 soft key (Counts Scroll):
-
O
nce to display the cook counter.
- Twice to display total cook time.
-
Thr
ee times to display total magnetron time.
- Four times to display total “oven on” time.
Viewing the Fault Log
From Screen 1 of the Info Mode (Figure 12), press
the R3 soft key to vie
w the fault log. To view time
stamps of each fault occurr
ence, press the soft key
adjacent to the fault code.
V
iewing the S
ervice Numbers
From Screen 1 of the Info Mode (Figure 12), press
the R4 soft key to view technical support numbers.
S
etting the Language
NOTE: Not available on some oven models.
F
rom screen 2 of the Info Mode (Figure 13), press the
L3 soft key to scroll through available languages. Each
time L3 is pressed, a different language is selected in
the following order: English (default), Spanish,
French, German, Portuguese, Italian, Russian, Greek,
Polish.
Resetting the Oven
R
esetting the o
ven is one way to clear an error
message, should one occur
.
To reset the oven, hold
the Info key for 5 seconds while the oven is cooling
down or off.
To Next Page
Loading...
