TurboChef NGO/SOTA - Page 9

Troubleshooting
Overview of Troubleshooting 31
Fault Code Descriptions 31
F
ault Code
Troubleshooting - F1 Blower Running Status Bad 33
Fault Code Troubleshooting - F2 Cook Temperature Low 34
F
ault Code
Troubleshooting - F3 Magnetron Current Low 35
Fault Code Troubleshooting - F4 Door Monitor Defective 36
F
ault Code
Troubleshooting - F5 Magnetron Over Temperature 36
Fault Code Troubleshooting - F6 Electrical Compartment Temperature High 37
F
ault Code Troubleshooting - F7 RTD Open 37
Fault Code Troubleshooting - F8 Heat Low 38
Fault Code Troubleshooting - F9 Cook Cavity Temperature High 38
Non-Fault Code Troubleshooting - No Keypad Input 39
Non-Fault Code Troubleshooting - “Cook Door Open” Message when Door is Closed 39
Non-Fault Code Troubleshooting - No Display (Screen is Blank) 40
Non-Fault Code Troubleshooting - Food Not Cooking Properly 41
N
on-Fault Code Troubleshooting - “Read Fail” Message when Loading a Menu 42
Non-Fault Code Troubleshooting - “Write Fail” Message when Loading a Menu 42
N
on-Fault Code Troubleshooting - Menu Settings are Not Present 43
N
on-Fault Code Troubleshooting - “Defective Media” Message When Oven is
Plugged in or Restarted 44
Oven Schematic 45
Appendix - Replacing Oven Components
Replacing Oven Components A-1
Replacing Items - No Cover Removal Required A-2
Replacing Items - Removing Outer Shell Required A-4
R
eplacing I
tems - Removing Outer Shell and Back Cover Required A-11