turck TBEN-S2-4IOL - PROFINET Diagnostics

V01.00 | 2019/10
123
Bit Meaning
ULVE Upper limit value exceeded
The process value exceeds the parameterized measurement range or the
chosen measurement range has been chosen too low.
VLOW Undervoltage
One of the voltages at the connected device is below the defined range.
VLOW Overvoltage
One of the voltages at the connected device is below the defined range.
10.4.3 PROFINET diagnostics
Module diagnostics
(slot 0 according to configuration tool)
PROFINET Diagnostics
Connector Error Code Channel
Undervoltage V1 - 0x0002 0
Undervoltage V2 - 0x0002 1
DXP diagnostics
(slot 1 according to configuration tool)
PROFINET Diagnostics
Channel Connector Error Code Channel
Overcurrent output DXP1 C0 0x0001 1
DXP3 C1 0x0001 3
DXP5 C2 0x0001 5
DXP7 C3 0x0001 7
IO-Link port diagnostics PROFINET Diagnostics
IO-Link port 1
(Slot 2, according to configuration tool)
Connector Error code Channel
Undervoltage (VLOW) C0 0x0002 0
Overcurrent (VHIGH) 0x0003
Overload (OVL) 0x0004
Over temperature (OTMP) 0x0005
Wrong or missing device (CFGER) 0x0006
Upper limit value exceeded (ULVE) 0x0007
Lower limit value underrun (LLVU) 0x0008
Data storage error (DSER) 0x0009
Process input data invalid (PDINV)
Maintenance events (EVT1)
Out of specification error (EVT2)
Port parameterization error (PPE)
Parameterization error (PRMER) 0x0010
Hardware error (HWER) 0x0010
IO-Link port 2
(Slot 3, according to configuration tool)
Similar to port 1 C1 2
IO-Link port 3
(Slot 4, according to configuration tool)