turck TBEN-S2-4IOL - Parameter Data Storage Mode = Overwrite

V01.00 | 2019/10
125
IOLM IOLD
1
Fig.64: Data storage mode = read in – parameter set in the device changed
10.5.2 Parameter ”data storage mode” = overwrite
n The data set in the master is always the reference data set.
n The synchronization of the parameter sets is unidirectional towards to the device.
n The status of the DS_UPLOAD_FLAG is ignored.
IOLM IOLD
1
Fig.65: Data storage mode = overwrite – parameter set in the master changed
10.5.3 Parameter ”data storage mode” = deactivated, clear
n The data set in the master is deleted.
n The synchronization of parameter sets is deactivated.
IOLM IOLD
Fig.66: Data storage mode deactivated – no synchronization