turck TBEN-S2-4IOL - VSC-Vendor Specific Classes

V01.00 | 2019/10
85
8.9.6 VSC-Vendor Specific Classes
In addition to supporting the above named CIP Standard Classes, the device support the
vendor specific classes (VSCs) described in the following.
Class Code Name Description
dec. Hex.
100 0x64 Gateway Class [}86] Data and parameters for the
field bus specific part of the device.
103 0x67 IO-Link Parameter Object
[}87]
ISDU object for acyclic transmission
of parameter data between IO-Link
master and IO-Link device
135 0x87 Basic Class [}92] Parameters and diagnostics of the di-
gital channels channels
137 0x89 IO-Link Port Class [}93] Parameters and diagnostics of the IO-
Link channels
138 0x8A IO-Link Events Class [}95] IO-Link Events
Class Instance of the VSC
NOTE
The class instance attributes are the same for each Vendor Specific Class.
The class-specific Object Instances and the corresponding attributes are explained in
the paragraphs for the different VSC.
The general class instance attributes are defined as follows.
Attr. no. Designation Get/Set Type Value
Dec. Hex.
100 0x64 Class revision G UINT Revision no. of the class (maj. rel.
*1000 + min. rel.).
101 0x65 Max. instance G USINT Number of the highest instance
of an object created on this level
in the class hierarchy
102 0x66 Number of instances G USINT Number of object instances cre-
ated in this class
103 0x67 Max. class attribute G USINT Number of the last class attrib-
ute to be implemented