Commissioning
Connecting the devices to a Rockwell PLC with EtherNet/IP™
98
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
Right-click the EtherNet/IP™-Scanner in the 2nd instance of the RS Logix and add the
device to the project via Paste. In this example, the configuration with 4 byte in- and 4
byte output data plus diagnostics TBEN_S2_4IOL_4in4out_diag is used.
Fig.56: RSLogix – predefined configurations of TBEN-S2-4IOL in new project
To Next Page
Loading...
