76
• ‘Best lap’ duration is shown based on the 10 lap
durations stored and displayed in the menu under
PERFORMANCE RECORD.
- To reset the value (ref. page 59).
After 10th Lap if the 11th lap is triggered then the values
will be updated inside the LAP Menu on first in first out
basis. This means 10th value in the LAP menu will show
the latest data always.
If a particular lap time reaches 99 minutes, the current
lap gets reset to 0.
The ‘lap’ function is disabled automatically if the ‘ignition
lock’ or ‘switch engine cut off’ is turned OFF while it is
active and the current lap time will not get stored even
though the lap timer had been active before the turning
OFF the ‘lock / switch’.
If the lap timer function is switched ON when only fewer
laps have been completed earlier (eg. 4 laps completed),
it starts from the next lap only (5th lap) and not from
the first.
In the lap timer, complete stored laps can be reset.
To Next Page
Loading...
Need help?
General
