http://www.tyan.com
153
5.3.15 USB Configuration
USB Controllers / USB Devices
Read only.
Legacy USB Support
Enable USB legacy support. AUTO option disables legacy support if no USB devices
are connected. DISABLE option will keep USB devices available only for EFI
applications.
Enabled / Disabled / Auto
XHCI Hand-off
This is a workaround for OSes without XHCI hand-off support. The XHCI ownership
change should be claimed by XHCI driver.
Enabled / Disabled
USB Mass Storage Driver Support
Enable/Disable USB Mass Storage Driver Support.
Enabled / Disabled
To Next Page