TYM T293HST - Damage of the Rops; Do Not Weld, Drill or Straighten the Rops

DAMAGE OF THE ROPS
If the tractor has rolled over or the ROPS has damaged (such as striking an overhead object during
transport), It must be replaced to provide the original protection. After an accident, check for
damages to the 1. ROPS, 2. Seat, 3. seat belt & seat mountings. Before you operate a Tractor,
replace all damaged parts.
DO NOT WELD, DRILL OR STRAIGHTEN THE ROPS
Never attach chains, ropes to the ROPS for pulling purposes; this will cause the
Tractor to tip backwards. Always pull from the Tractor drawbar. Be careful
WARNING
Tractor
to
tip
backwards.
Always
pull
from
the
Tractor
drawbar.
Be
careful
when driving through door opening or under low overhead objects. Make sure
there is sufficient overhead clearance for the ROPS fatal injuries
If the R
O
P
S
is removed or re
p
laced
,
make certain that the
p
ro
p
er hardware is
WA RN IN G
OS p , p p
used to replace the ROPS and the recommended torque values are applied to the
attaching bolts
28
WARNING
Always wear your seat belt if the tractor is equipped with ROPS