TYM T293HST User Manual

ENGINE COOLANT
■ Checking Coolant
1. Park tractor on level surface
2. Check the coolant when engine is cool enough.
3. Open the hood.
4. Remove the radiator cap.
5. Ensure that the coolant is up to the filler neck and that it
is clean with the correct anti-freeze or anti corrosion
inhibitor in it.
6. If low, add coolant.
■ Changing the Coolant
1. Park tractor on level surface
2 Sh toff engine Allo engine to cool eno gh
2
.
Sh
u
toff
engine
.
Allo
w
engine
to
cool
eno
u
gh
.
3. Open the hood.
4. Open the drain cock in front of the Radiator to drain the
coolant.
5. Open the radiator cap at the same time.
6 To give a thorough clean run a hose into the radiator and
6
.
To
give
a
thorough
clean
run
a
hose
into
the
radiator
and
flush it out.
7. Close the cock
8. Fill the radiator with a coolant mixture of water and
corrosion inhibitor or anti freeze.
9. Close the radiator ca
p
.
Drain Cock
p
10. Start the engine and allow it to run for approx 5minutes.
Check the water level again and top up if required.
Drain
Cock
Do not remove the radiator cap on a hot engine.
Serious burns, can result from the contents of pressurized, hot radiators.
All th i t l d l t l b f i di t
CAUTION
Allow the engine to cool down and then turn the cap slowly to ensure, that there
is no excessive pressure in the radiator.
66
DANGER
All
ow
th
e eng
i
ne
t
o coo
l
d
own comp
l
e
t
e
l
y
b
e
f
ore open
i
ng ra
di
a
t
or cap.

TYM T293HST Specifications

General

Brand	TYM
Model	T293HST
Category	Tractor
Language	English