TYM T293HST - THREE-POINT HITCH AND DRAWBAR

HYDRAULIC REMOTE CONTROL VALVE (OPTIONAL)
The hydraulic remote control valve can be equipped as option. The valve is used when attaching the
implement operated by hydraulic cylinder.
The outlets have male threaded
The
outlets
have
male
threaded
.
Use the remote control lever to operate implement. Move the lever up or down to control implement.
Make sure that Remote Control Valve Lever should be in neutral position
In case do not use the remote control valve
CAUTION
In
case
,
do
not
use
the
remote
control
valve
.
Failure to follow this instruction can result in serious damage of hydraulic
Components and engine.
56