MID PTO(OPTIONAL)
The speed of mid PTO is 2,000rpm. Use the PTO lever to engage. The PTO switch must be OFF
before PTO is engaged.
1. Decrease engine speed to near idle.
2. Make sure that PTO switch is OFF.
3. Engage mid PTO using the PTO lever.
4. If rear PTO is needed to engage, shift the PTO lever to correct position.
.
urn on
e
sw
c
.
6. Increase engine speed to desired speed.
Mid PTO safety cover
Mid Mid + Rear Rear
If operator turns off PTO switch, rear PTO and mid PTO are off at once.
Do not operate any implement at a high speed than is specified for it.
When making adjustments to the implement stop the engine to avoid serious
injury.
52
CAUTION
When leaving the tractor stop the engine, and remove the key. Set the parking
brake.