TYM T293HST - Stopping and Parking

5. Release the parking brake by depressing the brake.
6Sl tthdii di ti dd d tl
6
.
S
e
l
ec
t
th
e
d
r
i
v
i
ng
di
rec
ti
on an
d
d
epress spee
d
con
t
ro
l
pedal.
■ Speed Control Pedals
Depress the forward speed control pedal to move forward.
Depress the reverse control pedal to move backward.
Depress
the
reverse
control
pedal
to
move
backward.
The speed control pedal will return in neutral position and
the tractor will stop when the speed control pedal is
released.
Do not chan
g
e from forward to backward or backward to forward suddenl
y
in
STOPPING AND PARKING
1 Release speed control pedals Depress the brake pedal to
IMPORTANT
gy
high range. Sudden change may result in damage of mechanism and place the
operator at risk of injury
1
.
Release
speed
control
pedals
.
Depress
the
brake
pedal
to
stop the tractor, if necessary.
2. Decrease the engine speed using hand throttle.
3. Move the range shift lever to neutral position.
4. Lower any implement to the ground.
5. Apply the parking brake.
6. Turn the key to OFF position to stop the engine.
7. Remove the key.
Always apply the parking brake when parking.
46
CAUTION
Always
apply
the
parking
brake
when
parking.
Failure to do so can cause accidents and damage.
As an extra precaution when parking on a slope, chock the rear wheels.