OPERATING THE TRACTOR
When the engine warm up correctly, the tractor is prepared for operating.
DRIVING
1. Make sure that all condition is ready.
Adjustments of the operator seat, the seat belt, and the
steering wheel.
Sufficient engine warm up
- Fasten seat belt
2. Raise the implement using the position control
lever.
3. Select s
eed ran
e with the ran
e shift lever.
■ Range Shift Lever
The range shift lever is used to select the speed range
of tractor.
The lever can be shifted only when the tractor stops
.
The lever is linear and has three positions, a neutral
and two range gears. A neutral is located between L
and H range gear.
IMPORTANT
Do not operate the range shift lever without stopping the tractor.
4. Increase the engine speed with hand throttle.
45