3. Push the hydraulic lever in the down position.
4. Pull the hand throttle lever to about 1/3~1/2 way.
■ Hand Throttle Lever
The hand throttle lever is used to change engine speed.
Pulling the throttle lever toward the operator decreases
engine speed.
Pushing it away from the operator increases engine
speed.
5. Insert the ke
. Turn the ke
“ON”
osition. Do not start
engine.
6. Make sure that the PTO switch is off. It is allowable that
either of PTO is off. Refer to above independent PTO.
7. Ensure that the warning lights are working
40
To Next Page
Loading...
Need help?
General
