UES AG · Breuershofstr. 48 · 47807 Krefeld · Germany
Tel.: 0049-2151-72950 · Fax: 0049-2151-729578 · info@ues-ag.net · www.ues-ag.net
Connection of the tank system
(necessary connections)
Electrical connection
Warning!
The work may only be performed by qualified personnel.
The power supply has to be interrupted.
Necessary: 400-V-(3L/N/PE/50 Hz) plug/connection.
The fuse for each phase cannot be more than 16A.
As an option, the tank system can be factory fitted with a connection cable. The power supply is
connected directly in the control box
Please only use the provided and designated terminals.
Only use the lines with the appropriate wire size as a feed.
For the performance data, please refer to the technical data.
To Next Page
Loading...
