UES perfectMelt - Menu Overview: Pump

UES AG · Breuershofstr. 48 · 47807 Krefeld · Germany
Tel.: 0049-2151-72950 · Fax: 0049-2151-729578 · info@ues-ag.net · www.ues-ag.net
21
Menu overview
Pump
Menu item
Setting
Description
Standard values
Piston pump
Dea / Man / Auto
Deactivate / Manual / Automatic
Auto
Delay [min.]
0-120 min
Pump released only after the
delay time
0
Turn on manually
Off / On
Activating the pump only
possible in manual mode
off
Gear pump 1
Dea / Man / Auto
Deactivate / Manual / Automatic
Deactivate
Delay [min.]
0-120
Pump released only after the
delay time
0
max. speed [U/min]
0-90
Maximum speed
0
Pressure sensor 1
Off / On1
The pressure is displayed in the
pump display, however, it is
independent of the chosen
pump 1/2
Off
Gear pump 1
Turn on manually
Off / On
Activating the pump only
Possible in manual mode
Off
FU 1
Off / On
Activating / Deactivating FU 1
Off
Gear pump 2
Dea / Man / Auto
Deactivate / Manual / Automatic
Deactivate
Delay [min.]
0-120
Pump released only after the
delay time
0
max. speed [U/min]
0-90
Maximum speed
0
Pressure sensor 2
Off / On2
The pressure is displayed in the
pump display, however, it is
independent of the chosen
pump 1/2
Off
Gear pump 2
Turn on manually
Off / On
Activating the pump only
possible in manual mode
Off
FU 2
Off / On
Activating / Deactivating FU 2
Off
In this menu section, you can change all settings related to the pump. From the selection of the pump via
delays to switching on manually for maintenance purposes.
Warning!
When the pump is activated and the housing flap is open, there is a danger of getting jammed by
the movable piston rod. Therefore, when the housing flap is open, always turn off the air pressure.