UES perfectMelt - EC Installation Declaration According to Machinery Directive 20061421 EG Annex II 1.B

UES AG · Breuershofstr. 48 · 47807 Krefeld · Germany
Tel.: 0049-2151-72950 · Fax: 0049-2151-729578 · info@ues-ag.net · www.ues-ag.net
58
EC Installation Declaration according to Machinery Directive 20061421EG Annex
II 1.B
The manufacturer / distributor
UES AG
Breuershofstr. 48
47807 Krefeld
Germany
hereby declares that the following product
Product description: perfectMelt with piston pump
Make: 4 kg / 8 kg / 14 kg / 20 kg / 30 kg
Model/type description: 150042 150082 150142 150202 150302
150044 150084 150144 150204 150304
150046 150086 150146 150206 150306
150048 150088 150148 150208 150308
150284 150314
150286 150342
Description: UES tank system perfectMelt
corresponds to the following essential requirements of the Directive:
see Annex "List of requirements met according to Annex I of EC Machinery Directive 2006/42/EC"
The following additional EU directives have been applied:
EMC Directive 2004/108/EG
Low Voltage Directive 2006/95/EG
The safety objectives of EC Directive 2006/95/EC as well as those of DIN VDE 0100 have been met.
The commissioning of this product is prohibited until the machine or system into which this product is to
be incorporated or of which it represents a component complies with the provisions of all relevant
guidelines.