Need help?Do you have a question about the Ugolini MINI GEL and is the answer not in the manual?
General| Model | MINI GEL |
|---|---|
| Number of Bowls | 1 |
| Voltage | 230 V |
| Color Options | White |
| Capacity | 3.5 L |
| Dimensions (1 bowl) | 400 x 600 x 400 mm |
| Material | Stainless Steel |
Lists parameters for operation mode adjustments, including density and temperature settings.
Details parameters for manufactory settings, covering density, hysteresis, and motor control.
Chronology of firmware versions for the control and display circuit boards.
Chronology of firmware versions for the main circuit board.
Step-by-step guide to opening the dispenser by removing rear and side panels.
Procedures for removing the control and power circuit boards from the dispenser.
Instructions for removing the water collection tray.
Steps to remove the geared motor from the dispenser.
Guide to removing the defrosting fan and lid presence sensors.
Steps for removing and replacing the temperature sensor.
Procedure for updating firmware on the control board.
Procedure for updating firmware on the master power board.
Procedure for updating firmware on the slave power board.
Method for systematically inspecting the refrigeration circuit for gas leaks.
Procedure for safely emptying the refrigerant circuit.
Steps to follow for emptying the entire refrigeration system.
Detailed instructions for recharging the machine with refrigerant gas.
To Next Page
