UHP SCPC MODEM
USER MANUAL, v3.2
© ROMANTIS 2015 27 www.uhp.net
with configuration which is stored on TFTP-server. Click Save. The configuration will be loaded into the
router RAM and the settings will be applied.
WARNING! CONFIGURATION FROM THE SELECTED MEMORY BANK WILL BE LOADED AS CURRENT. IN SUCH A CASE
ROUTER OPERATION MODE MAY CHANGE ACCORDING TO THE CONFIGURATION. THEREFORE SATELLITE CONNECTION
WITH THE ROUTER MAY BE LOST.
The active configuration must be saved in one of two configuration memory banks. To do that, choose a memory
bank (0 or 1) in Flash section and click Save.
To Next Page
Loading...