D/ MEANING OF THE DISPLAYED SYMBOLS
The display is composed of 2 lines. Generally the line at the top displays the value of
the parameters, and the line at the bottom gives some indications on the directions for
use and the operations to be carried out.
Consequently, to carry out the sequences of displaying or programming, you have just to
follow the messages displayed on the line at the bottom of the display.
MEANING OF THE MESSAGES
> +, –
Pressing the key + or –, we make the functions filing off
> PRO 3s
Pressing the key "PRO" during 3 seconds, we select the displayed function
> +, –
Pressing the key + or –, we make the pages of the functions filing off
> PRO
Pressing "PRO", we select the parameter to be modified which begins to blink
or we
confirm the blinkin
> +, –
By + or – we increase or decrease the value of the blinking parameter
> Menu
By the key "Menu", we go out of the function, after validating by PRO
> T
you have to select a key to make appear these parameters or you have to configurate it
E/ EXPLANATION OF EACH FUNCTION
(1) MANUAL CONTROLS
• Enables to operate during maximum 5 seconds each electrical component in order to check
its functioning
(2) CLOCK
• Enables to adjust the hour, the date and the day of the week.
(3) TEMPERATURES
• Enables to adjust the 3 temperatures regulating the machine as well as the Steam
Air
option if installed:
1. Temperature of the steam boiler
2. Temperature of the coffee group body
3. Temperature of the coffee boiler
4. Stop temperature of the Steam
Air
Default Values:
Steam
Unit Coffee
Steam
Air
(not activated)
DUO TV = 120° TG = 105° TC = 105° TVS = 00
SOLO /UNO TV = 120° TG = 100° TC = 130° fix TVS = 00
C – 5
To Next Page
Loading...
Need help?
General
