4 / V150- MAY 2005
TANGO INFORMATION NOTE - May 2005
Installation of the new program version V150
From the week 19 / 2005
New Ref : CPU Card V150 CPU Card V150
French version
45345 45347
English version
45346 45348
This is the further version of CPU V145 with ABS system (anticipating or delaying the turntable
failure according to rotation speed). That includes the 2 following functions:
1 ) Reset of the counter of the 26h00 cleaning cycle:
(This function is only used by technicians when installing the machine, or if repair. It must not be
communicated to customers).
Operating way:
- Introduce data card V150 in the card reader
- Push the key PRO
- Dial the code 3332
The code 3332 reset the counter of the 26h00 cleaning cycle and allows delaying the next cleaning
26h00 later.
2 ) Recognition of data card compatibility according to the program version :
When code 4443 is dialled with a non compatible data card (first to version V145), the data transfer
will not be possible and the error code 22 will be displayed to signal the incompatibility. This is to
prevent a breaking down resulting from a wrong data transfer.
Important
: Whatever the programme version is, from the V115, the parameter transfer with the codes
4442 et 4441 is possible, whatever the data card. After each transfer remember:
- to reset the clock.
- to start an Autocontrol 1 and 2 by entering in the menu " Packing Level " .
- to make the full adjustment of grinders.
- to empty the coffee drawer and reset the counter pushing 3 sec the «+ ».
Summary of the different codes:
3331 : Reset "coffee" counters
3332 : Reset 26H (time after when the cleaning cycle start)
4441 : Data transfer from Data card to Tango CPU card.
4442 : Parameter recuperation from Tango CPU card to DATA card.
4443 : Transfer from French texts or English ones, to Tango CPU card.
E – 11
To Next Page
Loading...
Need help?
General
