102
Using the Close Call Feature
If this option is turned on, the scanner overrides
the current channel and goes to the Close Call
hit. The scanner displays CC Found Press
Any Key. When you press a key, the
frequency appears.
Turn the scroll control to display an option, then
press the scroll control.
• Set CC Alert: Lets you select how the
scanner alerts you when it receives a Close
Call signal. You can select any of the following
options.
Select Mode
• Beep (the scanner beeps when it receives a
Close Call signal)
• Light (the backlight turns on when it
receives a Close Call signal)
• Beep+Light (the scanner beeps and the
backlight turns on when it receives a Close
Call signal)
• None (the scanner does not alert)
Select Beep
• Off (the scanner does not beep)
• Alert 1-9 (the scanner sounds an alert
beep to notify you of the emergency
transmission. You can choose any of 9
different beep types
Set CC Pause
• 3-60 sec (the scanner pauses for this
amount of time before it notifies you of the
emergency transmission).
• Infinite (the scanner does not notify you
of the emergency transmission).
Turn the scroll control to display an option, then
press the scroll control to select it.
To Next Page
Loading...
