95
Searching and Storing
Set C-Ch Only - lets you search for a Motorola con-
trol channel. If it finds one, the scanner scans the sys-
tem.
Adjust P25 Level - adjusts the digital decode
threshold to match the transmission you are
hearing when it receives a strong signal and has a
high decode rate.
Search With Scan - sets whether the scanner
includes the custom search during scanning.
If unlocked, the scanner first scans all selected sys-
tems, then searches the selected service searches for
the selected hold time (0-255
seconds).
4. Select the option you want to change for the
custom search range you selected, then press the
scroll control.
Editing a Service Search
You can change the way service search works for
each service.
1. Press then turn the scroll control until
Search for ... appears. Then press the scroll
control. Or press and Srch, then No. One of
the search feature options appear.
2. Turn the scroll control until Edit Service
appears, then press the scroll control to select it.
3. Turn the scroll control to highlight the service
search you want to edit, then press the scroll
control to select it.
• Set Delay Time This setting determines how
long the scanner waits after a transmission ends
before resuming quick search or Close Call
operation. Select your setting, then press the scroll
control.
Off The scanner resumes immediately when
the transmission ends.
Menu
Func
To Next Page
Loading...
Need help?
General