83
Programming/Editing Optional Settings
Setting the Group Quick Key
Program System
Select the system
Edit Group
Select the group
Set Quick Key
After selecting this option, press 0-9 to assign the
group to a quick key or press No to assign the system
to no quick key, then press E.
Hints:
• You can assign as many groups to the same quick
key as you want.
• To be scanned, a group’s quick key must be
activated.
Setting Group Lockout
Program System
Select the system
Edit Group
Select the group
Set Lockout
This setting determines whether the scanner will scan
this group when it is enabled. Select your setting, then
press E.
Lockout - the group is not scanned.
Unlocked - the group is scanned.
Note: The default setting is Unlocked.
Deleting Groups
Program System
Select the system
Edit Group
Menu
Menu
Menu
To Next Page
Loading...
Need help?
General