85
Programming/Editing Optional Settings
• If you do not enter a channel name, the scanner
displays the frequency (for conventional systems)
or the talk group ID (for trunked systems) when it
stops on a channel.
• Press twice to delete the current character.
• Press three times to clear the entire alpha tag.
• Channel names take up extra memory. To maxi-
mize channels, use channel names only where
necessary.
Setting Channel Priority
(Conventional Channels Only)
Program System
Select the system
Edit Group
Select the group
Edit Channel
Select the channel
Set Priority
This setting controls whether the scanner treats the
channel as a priority channel while scanning. Select
your setting, then press E.
On - when you turn on the Priority feature, the channel
will be scanned every 2 seconds. P appears at the end
of the default name.
Off - the channel will not be treated with priority.
Note: The default setting is Off.
Setting Channel Alert
Program System
Select the system
Edit Group
Menu
Menu
To Next Page
Loading...
Need help?
General