76
Programming/Editing Optional Settings
Preset - select from the 16 most common fleet maps
(see “Preset Fleet Maps” on Page 125). Press E to
select.
Custom - allows you to enter a custom fleet map. Enter
the size code for each block. Press E to select.
Notes:
• If you don't know the fleet map for your Motorola
Type I system, check the Internet. This information
is commonly posted on sites such as those we
reference in “Where To Get More Information” on
Page 29.
• The default setting of no fleet map is the correct
setting for Motorola Type II systems.
Setting the Motorola Status Bit
(Motorola Systems Only)
Program System
Select the system
Edit Sys Option
Set Status Bit
Motorola systems use talk group ID's in multiples of
16. ID numbers that fall between these ID's indicate
special status flags for the system. This setting deter-
mines how the scanner will handle ID's that are not
multiples of 16. Select your setting then press E.
Ignore - the scanner rounds all received ID's down to
the next interval of 16.
Yes - the scanner treats all received ID's as unique
ID's.
Note: The default setting is Ignore.
Menu
To Next Page
Loading...
Need help?
General