104
resuming scan. This lets you continue to hear transmissions detected with the
Close Call feature, even after you are no longer close enough to receive it as a
Close Call hit. Follow these steps to set up the option.
[MENU] Close Call F
Hits with Scan F
Set Quick Key or Set Lockout or Set Hold Time F
Set the available option as you would for other menu items.
This special channel group is automatically cleared whenever you cycle the
scanner’s power. To permanently save one of the channels, press [E
YES] when the
scanner is stopped on one of the frequencies. To keep the scanner from
repeatedly stopping on an annoyance hit, press [L/O] when the scanner stops on
the frequency.
To Next Page
Loading...
Need help?
General
