125
Using the BCD996T with a GPS
GPS Review Location Mode
If you have programmed data for a Point of Interest, Dangerous Crossing, and a
Dangerous Road, you can review each set on a screen dedicated to showing just
that data.
Press [EYES] in GPS Mode.
The most recent stored location is displayed. Use the Scroll Control to display the
next screen for review.
The following keys also have a different function while in GPS Review Mode.
[MENU] — returns to GPS Mode.
[L/O] — changes the status of the currently displayed location data.
[L/O] —
press and hold to unlock all locations of the current type (POI, DXG, or DRG)
Unlocked All TTTs? and Yes=”E” / No=”.” is displayed. TTT shows the
location type as POI, DXG or DRD.
[L/O] — press and hold in Function Mode unlocks all locations of all types.
Unlocked All Location? and Yes=”E” / No=”.” is displayed.
[.No] — returns to GPS Mode.
[EYES] — lets you edit a location details
[SCAN/SEARCH] — enter scan mode.
[HOLD/RESUME] — enter Scan Hold mode
F — enter Function Mode. Then use to review all stored locations
in alphabetical order.
— select a programmed location from all stored locations. The location data is
stored in the order POI, Dangerous Xing, and Dangerous Road. Then, in each
category, the data is stored using the programmed name.
Elevation Display Speed Display Location Display
To Next Page
Loading...
Need help?
General
