15
Introduction
Multi-Site Trunking — Lets you share system channels across multiple sites to
more efficiently use the scanner’s memory and more easily select sites to monitor.
Control Channel Only Scanning — If the scanner is set to scan a Motorola
system, you can set it so it scans using only control channel data. You do not have
to program voice channel frequencies into memory in this mode as long as all
possible control channels are programmed.
Adaptive Digital Threshold — Automatically sets the digital decode threshold for
APCO 25 systems.
GPS
Location Based Scanning — If you connect a GPS unit to the scanner it can
automatically enable and disable systems based on the Location Information
(longitude, latitude, Range) that you provide.
GPS Non-Radio Based Features — The scanner alerts you to Dangerous
Intersections, Speed Alerts, and Points of Interest that you program into the
scanner.
GPS Display Mode — Lets you display extended GPS information such as
Distance to a POI, Direction to a POI, Time to a POI, Speed, Position, and more.
Weather
Weather Search — Lets your scanner receive your local NOAA weather
transmission.
SAME Weather Alert — Lets your scanner sound an alert when a SAME weather
alert signal is transmitted on a NOAA weather channel. The scanner also displays
the transmitted alert type. This helps you quickly find out about severe weather in
your area and lets you avoid false alarms.
WX Priority — Lets your scanner alert you when a weather alert is transmitted on
a NOAA weather channel.
Search
Service Search — Lets you quickly select and search the scanner’s
preprogrammed frequencies.
Custom Search — Lets you program up to 10 custom search ranges. You can
search any of these ranges simultaneously.
To Next Page
Loading...
Need help?
General
