68
Specifying the Correct System Type
In order for trunk tracking to work properly, you have to specify the correct system
type when you create the system. Here are some tips for selecting the correct
type:
• Use online resources, such as the www.radioreference.com database, to
identify the system type.
• Even though a system has digital channels, it is not necessarily a P25 system.
To be P25, the system type must be described as Project 25 (there are many
Motorola 800 Standard systems that have some digital channels.
These should be entered as Motorola 800 Standard and not P25).
• EDACS Wide is the same as EDAC Standard.
• EDACS Networked sites are EDACS Narrow
Following these steps to change the system name.
[MENU] Program System F
Select the system F
Edit Name F
To enter a letter, turn the Scroll Control until the character you want appears. To
enter a decimal point, press [.No]. To move the cursor to the left, press [4]. To
move the cursor to the right, press [6].
To clear a character, press [.No] twice. To clear all characters, press [.No] 3 times.
To accept an entry, press [EYES] or F.
[MENU] Program System F
Select a conventional system F
Edit Sys Option F
Set Quick Key F
After selecting this option, select any number from 0-99 to assign the system to a
quick key or press [.No] to assign the system to no quick key, then press
F.
Programming System Options MELCS
Editing the System Quick Key C
To Next Page
Loading...
Need help?
General
