90
Select the channel F
Set Priority F
This setting controls whether the scanner treats the channel as a priority channel
while scanning. Select On or Off, then press
F.
On — when you turn on the Priority feature, the channel will be scanned every 2
seconds.
Off — the channel will not be treated with priority. The default setting is Off.
[MENU] Program System F
Select a system F
Edit Group F
Select a channel group F
Edit Channel F
Select the channel F
Set Alert F
Off — the scanner does not alert you when the channel becomes active.
Alert 1 - 9 — the scanner sounds an alert beep to notify you that the channel
has become active. You can choose any of 9 different beep types. Once you
choose an alert tone, then:
Set Level F
Auto — the scanner automatically sets the channel alert beep to match the
master volume level.
Level 1 - 15 — the scanner adjusts the volume of the beep to the level you
select.
[MENU] Program System F
Select a system F
Edit Group F
Select a channel group F
Edit Channel F
Select a channel F
Set Record F
Setting Channel Alert MECL
Setting Channel Record MECL
To Next Page
Loading...
