45
Operation
Operation
Turning On the Scanner and Setting the Squelch
To turn the scanner on, rotate [VOL] clockwise. Turn the knob to a comfortable
sound level.
Rotate the squelch control [SQ] clockwise until you either hear a broadcast or
noise just stops. The control is now set for strong signals. If you desire to hear a
weaker signal, turn it counter clockwise from that point until you hear background
noise once more.
Startup Key Operation
You can setup a Startup Key Configuration so that the scanner can change the
lockout for each system or each site by pressing an assigned key while you power
up the scanner or an opening screen is displayed. Navigate to Set Startup Key
there are differences in the menu structure for Trunked and Conventional systems.
Conventional
[MENU] Program System F
Select the conventional system F
Edit Sys Option F
Set Startup Key Ffor each system.
Trunked
[MENU] Program System F
Select the trunked system F
Edit Site F
Select the site F
Set Startup Key F for each system or site.
Search Range
[MENU] Search for… F
Edit Service F
Select a Service RangeF
Search with Scan F
Set Startup KeyF
OR
To Next Page
Loading...
Need help?
General
