107
Search and Close Call Options
This setting determines whether the scanner automatically ignores transmissions
found during Custom Search, Quick Search, or Close Call operation that are on
common broadcasts, paging systems, and other annoyance radio sources.
Note: Broadcast screening does not work in All service search ranges.
Set All Band On — turns on broadcast screen on each band.
Set All Band Off — turns off broadcast screen on each band.
Set Each Band — lets you set broadcast screen only on specific bands you
select. On or Off appears next to each option. Turn the Scroll Control to select
an option then press
F to change the setting.
Pager — the scanner skips known paging system frequencies.
FM — the scanner skips known FM frequencies.
UHF TV — the scanner skips known UHF TV frequencies.
VHF TV — the scanner skips known VHF TV frequencies.
NOAA WX — the scanner skips known NOAA weather frequencies.
Band 1-10 — select the custom band where you want to screen out broadcast
sources.
Program Band — brings you to a menu setting to let you program a custom
frequency range for broadcast screen. Turn the Scroll Control to select an option
then press
F to change the following setting.
To set the custom range of a band, select one and press F to set the limit.
Band 1-10 — select the group where you want to screen out broadcast sources.
Set Lower Limit— enter the lower limit of the frequency range, then press F
to set it.
Set Upper Limit — enter the upper limit of the frequency range, then press F
to set it.
To set the custom range of a band, select one and press F to set the limit.
Finding Repeater Output Frequencies
[MENU] F
Srch/CloCall Opt F
To Next Page
Loading...
