91
Programming Your Scanner
On — the scanner outputs the signal.
Off — the scanner does not output any audio.
Note: In order for the function to work, you must set the channel to record. You
must also set the system’s record option to either All Channel (which will record
all channels regardless of the channel’s record setting) or Marked Channel
(which only records the channels you’ve set to record).
[MENU] Program System F
Select a system F
Edit Group F
Select a channel groupF
Edit Channel F
Select a channel F
Set Lockout F
Unlocked — the channel is scanned when its quick key is enabled.
Temporary L/O — the channel is locked for this session.
Lockout — the channel is not scanned.
[MENU] Program System F
Select a system F
Edit Group F
Select a channel group F
Edit Channel F
Select a channel F
Copy Channel F
You see Copy Channel Copied to Buffer.
Press [MENU] to return to one level before You see Paste Channel as the last
list item. At this point you can paste that channel information to another group or
compatible system.
[MENU] Program System F
Select a system F
Setting Lockout MECL
Copying a Channel MECL
Deleting a Channel MECL
To Next Page
Loading...
Need help?
General
