VIRDI 4000
TM
User’s Manual
26
UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099,
E-Mail:sales@unioncomm.co.kr, http://www.unioncomm.co.kr/eng
input for authentication.
Card registration (refer to “5. RF” registration) precedes fingerprint ⑤
registration (refer to “1. FP” registration).①
3.3.1.11. “93. ID&PW/RF&PW” registration
After both card and password are registered, authentication method is
selectable as ID and password authentication or card and password
authentication.
◆ [*] [1] [1] User ID [ENTER] [9][3]
Place the card Input PW [ENTER] Input same PW [ENTER] ◆
If a user feels difficult in inputting ID, a card can be used instead of ID input for
authentication.
Card registration (refer to “5. RF” registration) precedes password ⑤
registration (refer to “2. ID&PW” registration).②
3.3.2. Deleting User
◆ [*] [1] [2] User ID [ENTER] ◆
In the main menu, press [1] to select “1.User” and the following screen appears:
1. Add
2. Delete
3. Modify
4. Add Admin
5. Delete All
To delete user, press [2].
After entering the user ID to be deleted, press [ENTER]. All the information
about the user in the local terminal is deleted together with a “ppiririck” buzzer
sound. However, the information about the user is still stored in the server. To
completely delete this information, the data in the server should be deleted.
If a non-registered user ID is entered, “2.Delete” appears together with a “ppibig”
sound.
Caution is required when deleting a user or an administrator as there is not any
different procedure for deleting their information. Also, note carefully that user’s
information stored just in the local terminal – not in the server – is not
recoverable after deletion is complete.
To Next Page
Loading...
Need help?
General
