Chapter 5
ISBT Code 128 Implementation
Configuration Mode
Enable ISBT Code 128
Disable ISBT Code 128
The bar codes below enable or disable a special transmit mode as outlined in section 3.5.2 of
the ISBT-128 Specification. This output method allows the user to confirm independently the
accuracy of the Code-128 check digit.
Enable ISBT Special Transmit
Disable ISBT Special Transmit
The bar codes below enable or disable the transmission of the ISBT Code 128 data identifiers.
When this option is enabled, the first two data characters are removed from the data stream
(ID characters) unless the ISBT bar code scanned contains Donation Identification Number
identifiers. If Donation Identification Number identifiers are present, only the first ID character is
removed from the Donation ID Number. The second is regarded as normal data.
Don’t Transmit ISBT ID’s
*
Transmit ISBT Identifiers
The bar codes below convert and transmit the Mode 37, 2 check digit from the flag digits of the
Donation Identification Number provided the check digit is contained in the flag digits.
Transmission of the Donation Identification number will be the same except for the last two
digits, which are converted into a single check sum character.
Convert Flag Digits to Mod 37, 2 CD
*
Normal Flag Digit Transmission
19
Copyright 2012 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
To Next Page
Loading...
