Unitech MS837 - User Configurable Suffixes

~
Character to Replace
~
Replacement Character
No Replacement
User Configurable Suffixes, All Data
Note: Scan the Enter/Exit Configuration mode code before trying to set this feature. Refer to
Multi-Code Method on page 1.
~
Configurable Suffix Character #1 - A suffix ID can be added and
assigned for data transmission.
~
Configurable Suffix Character #2 - Assigns a second configurable
suffix character.
~
Configurable Suffix Character #3 - Assigns a third configurable suffix
character.
~
Configurable Suffix Character #4 - Assigns a fourth configurable
suffix character.
~
Configurable Suffix Character #5 - Assigns a fifth configurable suffix
character.
~
Configurable Suffix Character #6 - Assigns a sixth configurable suffix
character.
~
Configurable Suffix Character #7 - Assigns a seventh configurable
suffix character.
~
Configured Suffix Character #8 - Assigns an eighth configurable suffix
character.
~
Configurable Suffix Character #9 - Assigns a ninth configurable suffix
character.
~
Configurable Suffix Character #10 - Assigns a tenth configurable
suffix character.
*
Clear All User Configurable Suffixes
31
Copyright 2012 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.