Unitech MS837 User Manual

Chapter 7
Prefixes/Suffixes
Scan the Enter Configuration Mode bar code before trying to set these features (see the
Multi-Code Method section).
User Configurable Prefixes, All Data
~
Configurable Prefix Character #1 - A prefix ID can be added and
assigned for data transmission. Use this code with a code byte
sequence, which represents the desired character.
~
Configurable Prefix Character #2 - Assigns a second configurable
prefix character.
~
Configurable Prefix Character #3 - Assigns a third configurable prefix
character.
~
Configurable Prefix Character #4 - Assigns a fourth configurable
prefix character.
~
Configurable Prefix Character #5 - Assigns a fifth configurable prefix
character.
~
Configurable Prefix Character #6 - Assigns a sixth configurable prefix
character.
~
Configurable Prefix Character #7 - Assigns a seventh configurable
prefix character.
~
Configurable Prefix #8 - Assigns an eighth configurable prefix
character.
~
Configurable Prefix Character #9 - Assigns a ninth configurable prefix
character.
~
Configurable Prefix Character #10 - Assigns a tenth configurable
prefix character.
25
Copyright 2012 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.

Unitech MS837 Specifications

General

Brand	Unitech
Model	MS837
Category	Scanner
Language	English